vetsuture® PGC - Monofilamento - Poliglecaprona 25- Suturas estériles absorbibles - Reabsorción a mediano plazo (90-120 días)
Suturas estériles absorbibles - Reabsorción a mediano plazo (90-120 días)
vetsuture PGC : Monofilamento - Poliglecaprona 25
Indicaciones
- Todos los tipos de sutura y ligadura
-Suturas musculares y subcutáneas
|
Ventajas
- Excelente firmeza del nudo
- Alta resistencia a la tracción
- Catgut-like
|
Suturas equivalentes
- Ethicon® Monocryl ® - Covidine® Biosyn ® - B.Braun ® Monosyn ®
|
Poliglecaprona 25
Monofilamento
Suturas estériles absorbibles
Reabsorción a mediano plazo (90-120 días)
Soporte de la herida: 20 días
Hilo de 75 cm de longitud
Color: violeta
Esterilidad de 5 años
vetsuture® PGC (Poliglecaprone 25), is a monofilament synthetic absorbable suture, composed of a Polymer (Glycolide co-caprolactone). vetsuture® PGC sutures are available dyed in violet. Poliglecaprone 25 copolymer has been found to be nonantigenic, nonpyrogenic and elicits only a slight tissue reaction during absorption. vetsuture® PGC sutures comply with USP requirements, except for diameter. vetsuture® PGC suture is a monofilament which elicits a minimal acute inflammatory reaction in tissues and ingrowth of fibrous connective tissue. Progressive loss of tensile strength and eventual absorption of vetsuture® PGC sutures occurs by means of hydrolysis. Absorption begins as loss of tensile strength followed by loss of mass. Implantation studies in rats indicate that vetsuture® PGC suture retains approximately 50-60% of its original tensile strength 7 days post implantation and approximately 20-30% of its original tensile strength at 14 days post implantation. All of the original tensile strength is lost by 21 days post implantation. The absolute strength remaining 14 days post implantation meets or exceeds that historically observed with plain and chromic gut sutures. Absorption of vetsuture® PGC absorbable synthetic suture is essentially complete between 90 and 120 days.
Nuestra gama de suturas PGC
| hilo | Aguja |
| EP | USP | longitud | courba | longitud | Point | Ethicon |
B.Braun |
|
PGC1TC | 1 | 5/0 | 75cm - 29.5" | 3/8 | 13mm - 0.52" | TapperCut |
CC-1 |
DRC 13 |
PGC15TC | 1.5 | 4/0 |
75cm - 29.5" | 3/8 |
18mm - 0.71" | TapperCut |
V-4* |
DRC 18 |
PGC2TC |
2 |
3/0 |
75cm - 29.5" |
3/8 |
20mm - 0.79" | TapperCut |
V-4* |
DRC 20 |
PGC2DTC |
2 |
3/0 |
75cm - 29.5" |
1/2 |
26mm - 1.04" |
TapperCut |
V-7 |
HRC 26 |
PGC3TC |
3 |
2/0 | 75cm - 29.5" | 3/8 |
20mm - 0.79" | TapperCut |
V-4* |
DRC 20 |
PGC3DTC |
3 |
2/0 | 75cm - 29.5" |
1/2 |
26mm - 1.04" |
TapperCut |
V-7 |
HRC 26 |
|
PGC1CN |
1 |
5/0 |
75cm - 29.5" | 3/8 |
13mm - 0.52" | ReverseCut |
C-3 |
DS 13 |
PGC15CN |
1.5 |
4/0 |
75cm - 29.5" | 3/8 |
19mm - 0.75" | ReverseCut |
FS-2 |
DS 19 |
PGC2CN |
2 |
3/0 |
75cm - 29.5" | 3/8 |
24mm - 0.95" | ReverseCut | FS-1 |
DS 24 |
PGC3CN |
3 |
2/0 | 75cm - 29.5" | 3/8 |
30mm - 1.18" | ReverseCut |
FSL |
DS 30 |
PGC35CN |
3.5 |
0 | 75cm - 29.5" | 3/8 |
30mm - 1.18" | ReverseCut |
FSL |
DS 30 |
PGC4CN | 4 | 1 | 75cm - 29.5" | 1/2 |
40mm - 1.57" | ReverseCut |
CP |
HS 40 |
|
* suggested replacement
![](http://www.vetsuture.com/images/sterility.jpg) Esterilidad de 5 años (PGC = 3ans)
|
|
|
|
Nuestras referencias
COMPARE NUESTROS PRECIOS CON LOS DE SU ACTUAL
PROVEEDOR. Nuestros precios son, de media, entre un 27 y un 59 % más
bajos, llegando a ser, en algunos casos, hasta más del 80%
inferiores a otras marcas.
![](http://www.vetsuture.com/images/vetfirelogo.jpg)
Aguja - Vetfire®
| |
Instruction for Use |
|